Entering Your Area Code - Uniden Cordless Telephon Owner's Manual

• If your calling area
requires 10-digit
dialing, do not program
this option.
• When the area code has
already been stored in
memory, the stored area
code will be displayed.
To change it, press
xfer/del three times.
Then enter the new area
code. Or you can use
/RocketDial/ or
call id/ to move the
cursor and edit the
area code.
[ 16 ] G E T T I N G S T A R T E D

Entering Your Area Code

If you enter a 3-digit area code number in the "
does not appear in Caller ID messages. For calls received from outside your local area code,
you will see a full 10-digit number.
1) When the phone is in the standby mode, press menu/mute.
2) Press + or - to move the pointer to "
then press select/ch.
3) Press + or - to move the pointer to "
then press select/ch.
4) Use the number keypad (0 to 9) to enter a 3-digit
area code.
5) Press select/ch, and you will hear a confirmation tone.
6) Press end to exit.
" option, your local area code
",
",