Return To Service Procedure; Maintenance Records - Garmin GTN Xi Series Maintenance Manual

8 RETURN TO SERVICE PROCEDURE

8.1 Maintenance Records

After conducting required return to service procedures in accordance with Table 7-1 and updating aircraft
records in accordance with this section and in compliance with 14 CFR 43.9 and 14 CFR 91.417, the
aircraft may be returned to service.
Record the following information in the appropriate aircraft maintenance logs:
Software versions loaded during maintenance

Part and serial numbers of any LRU replaced

Any other applicable information related to the maintenance work performed on the aircraft

Verify that replacement LRUs' software and/or FPGA versions match those in the configuration log from
Appendix A in the aircraft records.
190-01007-C1
Rev. 1
GTN Xi Part 23 AML STC Maintenance Manual
Page 8-1