Safety Instructions - infaco Powercoup PW2 EC1700 Instructions Manual

Table of Contents

Advertisement

SAFETY INSTRUCTIONS

BEWARE! In order to reduce the risk of electrical discharge, injury and fi re during
the use of electrical tools, please observe the following basic safety measures.
Read and follow these instructions before using the tool, and keep these safety
instructions !
When not in operation, the POWERCOUP PW2 handle and its accessories must be
disconnected and stored in their case.
POWERCOUP PW2 handle must always be disconnected from all power
sources for to the following :
- Servicing.
- Charging the battery
- Maintenance.
- Transport.
- Storage.
While the tool is in operation, always remember to keep hands away from the
accessory being used.
Do not use the tool if you are tired or feeling unwell.
Wear recommended safety equipment specifi c to each accessory.
Do not leave the tool within the reach of children or visitors.
Do not use the tool if there is any risk of fi re or explosion- for example in
the presence of fl ammable liquids or gas.
Never carry the charger by its power cord, and so not pull on the power
cord to unplug it.
Keep the power cord away from heat sources, oil or sharp edges.
Never use the tool at night or in poorly lit conditions without setting up extra
lighting.
While using the tool, make sure you keep both feet on the ground and stay well-
balanced.
BEWARE! – the extension poles and rake are made out of carbon – a
conductive material. Do not use near electrical wires or other power
sources.
14

Advertisement

Table of Contents
loading

Table of Contents