SMA SHP 100-20 Operating Manual page 66

12 Troubleshooting
Event number
6701
6702
7001
7002
7015
7102
7106
7112
7113
7201
7202
7303
7320
66 SHP-20-BE-en-12
Message, cause and corrective measures
Communication disturbed
Error in the communication processor, the inverter continues feeding in, how-
ever. The cause must be determined by the Service.
Corrective measures:
• If this message is displayed frequently, contact the Service.
Fault sensor interior temperature
The cause must be determined by the Service.
Corrective measures:
• Contact the Service.
Parameter file not found or defective
The parameter file was not found or is defective. Loading the parameter file
has failed. The inverter continues to feed in.
Corrective measures:
• Copy the parameter file to the correct folder again.
Update file defective
The update file is defective. The update failed. The inverter continues to feed
in.
Update file successfully copied
The memory card is full or write-protected
Data storage not possible
Update main CPU failed
The cause must be determined by the Service.
Corrective measures:
• Contact the Service.
The device with serial number [xx] was successfully updated to
firmware version [xxx].
The firmware update was completed successfully.
SMA Solar Technology AG
Operating manual