2
Adjusting the trolling motor
Depth adjustment
1
Loosen the depth adjustment knob (A).
2
Raise or lower the motor assembly to the desired level.
3
Tighten the depth adjustment knob (A).
How to use the FlipSwitch
The FlipSwitch allows you to move the momentary switch (propeller ON) from the left to the
right side.
Tools required
•
1x Philips screwdriver #2
Procedure
1
Remove the lock screw (A) that secures the cover plate (B).
Adjusting the trolling motor |
min. 300.0 mm
(12.00")
Ghost Series Operator Manual
A
B
A
| 9