1. Manuals
  2. Brands
  3. Lowrance Manuals
  4. Outboard Motor
  5. Ghost Series
  6. Operator's manual

Lowrance GHOST Series Operator's Manual

Hide thumbs Also See for GHOST Series:
Table of Contents

Advertisement

Quick Links

GHOST
SERIES
®
OPERATOR MANUAL
ENGLISH
www.lowrance.com
Scan here
to save a copy

Advertisement

Table of Contents
loading

Related Manuals for Lowrance GHOST Series

Summary of Contents for Lowrance GHOST Series

  • Page 1 GHOST SERIES ® OPERATOR MANUAL ENGLISH www.lowrance.com Scan here to save a copy...
  • Page 3 This product’s warranty is supplied as a separate document. Compliance Declarations of conformity The relevant declarations of conformity are available at: www.lowrance.com. Europe The trolling motor complies with CE under the Radio Equipment Directive 2014/53/EU and Machinery Directive 2006/42/EC. The compass complies with CE under the Electromagnetic Compatibility Directive 2014/30/EU.
  • Page 4 Visit www.navico.com/intellectual-property to review the global trademark rights and accreditations for Navico Group and other entities. • Navico® is a trademark of Navico Group. • Lowrance® is a trademark of Navico Group. • Ghost® is a trademark of Navico Group. • FlipSwitch™ is a trademark of Navico Group.

  • Page 5: Table Of Contents

    Adjusting the speed Select a mode or action Modes and actions Service and maintenance General maintenance Propeller replacement Updating the software Configuration Troubleshooting Foot pedal LED indicators Direction indicator LED and audible feedback Serial number Contents | Ghost Series Operator Manual...

  • Page 6: Introduction

    Used when stowing and deploying the trolling motor. The trolling motor is latched in both stowed and deployed positions, pulling the cable releases the latching. Depth adjustment knob When loosened, the lower unit depth can be adjusted. Introduction | Ghost Series Operator Manual...

  • Page 7: Safe Operation With The Trolling Motor

    - Always disconnect motor from the batteries before cleaning or checking the propeller. - Do not attempt to disassemble the 360 breakaway. - Keep fingers clear from moving parts when stowing or deploying the trolling motor. Introduction | Ghost Series Operator Manual...

  • Page 8: Deploying And Stowing The Trolling Motor

    Tilt the trolling motor to the stow position. The lower unit (B) will automatically adjust to the proper stowing angle. If necessary, push the trolling motor down against the deck of the boat until it locks in the stow position. Attach the stow strap (C). Introduction | Ghost Series Operator Manual...

  • Page 9: Adjusting The Trolling Motor

    The FlipSwitch allows you to move the momentary switch (propeller ON) from the left to the right side. Tools required • 1x Phillips screwdriver #2 Procedure Remove the lock screw (A) that secures the cover plate (B). Adjusting the trolling motor | Ghost Series Operator Manual...
  • Page 10 Turn the FlipSwitch assembly (E) 1800 and fasten the screws that secure the FlipSwitch assembly. Slide the cover plate (B) back in place and fasten the lock screw (A). 10 | Adjusting the trolling motor | Ghost Series Operator Manual...

  • Page 11: Adjusting The Braided Stainless Steel Pull Cable Length

    Apply thread locker to the 2 set screws (D) if needed. Tighten the set screws and cut the pull cable (E) approximately 5 mm (1/5”) above the clamp (F). Re-install the handle top cover by pushing it down onto the handle. | 11 Adjusting the trolling motor | Ghost Series Operator Manual...

  • Page 12: Operation

    The direction indicator (A) shows the direction in which the lower unit (B) is pointing. Turn to starboard (right) by pushing the toe end (C) of the foot pedal down. Turn to port (left) by pushing the heel end (D) of the foot pedal down. 12 | Operation | Ghost Series Operator Manual...

  • Page 13: Activating The Propeller

    ON” on page 16. ¼ Note: Propeller will not run if the trolling motor is in the stowed position. Adjusting the speed Rotate the speed adjustment knob (A) to increase or decrease the propeller speed. | 13 Operation | Ghost Series Operator Manual...

  • Page 14: Select A Mode Or Action

    ¼ Note: Please visit www.lowrance.com to ensure your product is compatible and that the display software is up to date. The trolling motor and display must be connected to the same NMEA 2000 network.
  • Page 15 In heading lock mode, the heading (B) of the trolling motor is locked. ¼ Note: In this mode, the trolling motor does not compensate for any drifting caused by current and/or wind (C). | 15 Operation | Ghost Series Operator Manual...
  • Page 16 Press any mode key or the momentary switch to deactivate constant ON mode. Power-Pole auto down Lowers the Power-Poles all the way down. Power-Pole auto up Raises the Power-Poles all the way up. Create waypoint Creates a waypoint at the current vessel position. 16 | Operation | Ghost Series Operator Manual...

  • Page 17: Service And Maintenance

    Service and maintenance For service contact information, spare parts and accessories refer to: www.lowrance.com. General maintenance ⚠Warning: Neglecting to inspect, maintain, or repair your trolling motor can result in product damage or serious injury. Do not perform maintenance or service on your trolling motor if you are not familiar with the correct procedures.
  • Page 18 Tef-Gel to the terminals. Trolling motor Direction indicator As necessary Clean the indicator. Remove the indicator by prying it off with a flat head screwdriver. Blow/clean with rubbing alcohol. 18 | Service and maintenance | Ghost Series Operator Manual...

  • Page 19: Propeller Replacement

    Anti-seize compound prior to installing propeller nut (D). Install the new propeller. Make sure that the drive pin (A) aligns with the slot in the propeller (C). Torque the propeller nut (D) to 13 Nm (10 lbft). | 19 Service and maintenance | Ghost Series Operator Manual...

  • Page 20: Updating The Software

    Updating the software The trolling motor software can be updated from the Lowrance: Fishing & Navigation mobile app or from a compatible multifunction display unit. The Lowrance: FIshing & Navigation app can be downloaded from the relevant phone/tablet application store. Follow the prompts in the app to update the trolling motor software.

  • Page 21: Direction Indicator Led And Audible Feedback

    Speed increased (from remote controller or multifunction display). Speed decreased (from remote controller or multifunction display). Disabling anchor mode. Disabling heading lock mode. 2 short beeps Disabling course lock mode. Disabling constant ON mode. | 21 Service and maintenance | Ghost Series Operator Manual...

  • Page 22: Serial Number

    Blinking (1 Hz) During compass calibration. Serial number The serial number of the trolling motor can be found underneath the heel end (A) and the toe end (B) of the foot pedal. 22 | Service and maintenance | Ghost Series Operator Manual...
  • Page 23 Foot pedal LED indicators | 23 Service and maintenance | Ghost Series Operator Manual...
  • Page 25 © 2023 Navico Group. All Rights Reserved. Navico Group is a division of Brunswick Corporation. ®Reg. U.S. Pat. & Tm. Off, and ™ common law marks. Visit www.navico.com/intellectual-property to review the global trademark www.lowrance.com rights and accreditations for Navico Group and other entities.

Table of Contents