Activating The Propeller; Adjusting The Speed - Lowrance Ghost Series Operator's Manual

Activating the propeller

The propeller will run as long as the momentary switch (A) is pressed, provided the speed
adjustment knob is not in the OFF position.
The propeller will stop when the momentary switch is released.
A
It is also possible to run the trolling motor in Propeller constant ON mode, refer to "Propeller
constant ON" on page 16.

Adjusting the speed

Rotate the speed adjustment knob (A) to increase or decrease the propeller speed.
A
| 13
Operation | Ghost Series Operator Manual