Deploying And Stowing The Trolling Motor - Lowrance Ghost Series Operator's Manual

8 |

Deploying and stowing the trolling motor

A
Stowed position
Deploying
1
Release the stow strap (C) and pull the Braided stainless steel pull cable and handle (A) to
unlatch the trolling motor from the stowed position.
2
Lift the trolling motor from the stowed position and tilt it down until it is locked in the
deployed position.
•
If the trolling motor is turned ON, the lower unit will position itself according to the foot
pedal position.
•
If the trolling motor is turned OFF, the lower unit will be deactivated until the trolling
motor is turned ON and the foot pedal operated.
3
Make sure that the trolling motor is fully deployed and latched in the deployed position.
Stowing
The trolling motor should be turned ON during the stowing operation. This will ensure that
the lower unit is adjusted to its stowing position.
1
Pull the Braided stainless steel pull cable and handle (A) to unlatch the trolling motor from the
deployed position.
2
Lift the pull cable up and backward to slowly lift the trolling motor into the stowed position.
3
Tilt the trolling motor to the stow position. The lower unit (B) will automatically adjust to the
proper stowing angle.
4
If necessary, push the trolling motor down against the deck of the boat until it locks in the
stow position. Attach the stow strap (C).
Introduction | Ghost Series Operator Manual
C
B
A
C
B
Deployed position