18 |
Item
Wear bearing Yearly
Foot pedal
Electrical terminals Yearly
Trolling motor
Direction indicator As necessary
Propeller replacement
Tools required
•
17 mm deep socket
Procedure
1
Remove the propeller and inspect the drive pin (A) and propeller shaft (B) for damage. If the
shaft is damaged, contact a service center.
2
Replace any damaged parts. The drive pin (A) can be removed by gently tapping from one
side.
Service and Maintenance |
Occurrence
Description
Visual inspection.
Replace the wear bearings (A) if necessary.
The wear bearings can be pried off using a
wide blade flat screwdriver.
Check that terminal screws are not loose, if
needed reapply Tef-Gel to the terminals.
Clean the indicator. Remove the indicator
by prying it off with a flat head screwdriver.
Blow/wash out carefully if necessary.
Ghost Series Operator Manual
A
A
A
B