System Operations; Key Takeover - Ultra Start 1172 Owner's Manual

1172 SERIES
OWNER'S MANUAL
PRESS & RELEASE
1. Press and release the START button on the remote transmitter one time.*
*Press twice if the system is programmed for Safety Start.
2. The park lights will flash and the horn (optional) will Honk once as confirmation.
3. The vehicle will remote start and the park lights will turn on and remain on while
the vehicle is running under remote start**.
- If the remote start fails to start see the diagnostics chart at the back of the manual.
**DEFAULT RUNTIME OF THE SYSTEM IS 15 MINUTES.
TURN KEY ON
Once the vehicle is remote started and you wish to enter the vehicle to drive away
you must preform the following steps.
1. Enter the vehicle then insert the key into the ignition switch.
2. Turn the key forward to the ON or RUN* position. (This is usually 2-3 key
positions)
*Do not turn the key to the start position.
3. Step on the brake and the remote starter will turn off however the vehicle will
continue to run because the key is on. If the key is not in the on position when the
brake is pressed the remote starter and the vehicle will both shut off.**
** If the vehicle shuts down simply restart the engine with the key.
DO NOT TURN THE KEY TO THE START POSITION WHILE THE ENGINE IS
RUNNING.

SYSTEM OPERATIONS

REMOTE STARTER ACTIVATION
PAGE 4

KEY TAKEOVER