Switching on and off the cooking zone
Place suitable cookware on the respectively cook-
ing zone.
Switch on the hob about the button (1). A beep
sounds, and all indicators will light briefly.
The unit is ready for operation!
Select the cooking zone using the respective but-
ton (6).
Set a power level from 1 to 9 with the buttons
and
, the respective cooking zone display (7)
indicates the selection.
To switch off a cooking zone, select the zone
again and reset the power level to 0 until the indi-
cator appears [
].
0
Automatic parboiling
This feature automatically switches from high power
to parboil/heat to the preselected lower power to
continue cooking.
Set the power level for the desired cooking zone
to 9 and press the
display alternately shows [
Select the lower power level required for further
processing within the next 30 seconds. The fol-
lowing table shows the parboiling duration of the
respective power levels.
Power level
Parboiling duration min.
Power level
Parboiling duration min.
NOTE:
With changing the power level, the elapsed time is
automatically included in the corresponding parboil-
ing time of the new power level.
Child safety lock
To protect against unwanted operation, the unit is
equipped with a lock function.
button, the cooking zone
] and [
].
A
9
1
2
3
4
1
3
4.8
6.5
6
7
8
9
2.5
3.5
4.5
5
Switch on the child lock with the button (5). The timer
display shows the activation with [
except the on/off button, are locked for operation.
Timer function
General information
The timer can automatically switch off one or
more cooking zones after a set time.
The timer can be a set between 1 and 99
minutes. As long as the minute indicator in the
timer display flashes, the setting can be overwrite.
A red dot beside the power level indicates that a
timer is set for this cooking zone.
In timer mode, the power level can be changed
without changing the timer setting.
The timer function is canceled with power off.
Using the timer to switch off one cooking zone
Select the cooking zone for which you want to
set the timer.
Press the timer button (2). The timer display (4)
shows [
].
--
Do the timer setting with the buttons
The timer display (4) shows the remaining time.
Using the timer to switch off several cooking zones
Do the timer setting for several cooking zones as
described under "Using the timer to switch off
one cooking zone".
5
The timer display (4) shows the remaining time of
8.5
the cooking zone for which the shortest maturity
was selected. The cooking zone can be recog-
nized by the flashing dot next to the power level.
When the operation period of this cooking zone
is elapsed, the display (4) shows the remaining
time of the cooking zone for which the next
shortest maturity was selected.
NOTE:
You can view the remaining time of another cooking
zone at any time. To do this, select the appropriate
cooking zone.
9
]. All buttons,
Lo
and
.