Processing Methods To Common Problems And Faults; Power On Power Light Off; Power On Red Alarm Light On - Kalatec Automacao 2DM860H Driver Manual

Shenzhen Just Motion Control Electro-mechanics Co., Ltd
User-defined
inductance of
motor
Result of position
memory
Time of enable
position memory
11. Processing Methods to Common Problems and
Faults

11.1 Power on power light off

 No power input, please check the power supply circuit. The voltage
is too low.

11.2 Power on red alarm light on

 Please check the motor is connected with the drive.
 The stepper digital drive is over voltage or under voltage. Please
lower or increase the input voltage.
This parameter is set the inductance of motor. 0
means 2DM860H gets the inductance by control
algorithm of Parameter auto-setup, while 1 means
2DM860H gets the inductance through user sets.
This parameter is set to control the smoothness of
Display the result of position memory
This parameter is set of the time when enable the
position memory. The time is mean the space of
time to stop plus input.
- 25 -
0755-26509689