Kalatec Automacao 2DM860H Driver Manual page 24

Shenzhen Just Motion Control Electro-mechanics Co., Ltd
current
Percentage of
standstill current
Speed smoothness
Enable of position
memory
User-defined
resistance of
motor
current is set to be half of the selected dynamic
current or other current,
This parameter is set the percentage of standstill
current.
This parameter is set to control the smoothness of
the speed of the motor while acceleration or
deceleration, the larger the value, the smoother the
speed in acceleration or deceleration.
This parameter is set to enable the function of
position memory. 0 means disable, while 1 means
enable. If set 1, the 2DM860H can remember the
position of motor in the next time of power on.
This parameter is set the resistance of motor. 0
means 2DM860H gets the resistance by control
algorithm of Parameter auto-setup, while 1 means
2DM860H gets the resistance through user sets.
- 24 -
0755-26509689