Setting The Digital Clock; Battery Replacement - Ultra Start 42xx Owner's Manual

2WAY REMOTE STARTER/ ALARM

Setting The Digital Clock

To Enter Clock Adjust Mode
1 2 3
4
Press and hold buttons #1 and #4 until the minute portion of the clock located on
the LCD begins to flash
.
To Adjust The Time of day
To set the minute, press and release button #3 to increase the minute or press
button #2 to decrease the minute. To set the hour, press and release button #1
and the hour portion of the clock will begin to flash. To set the hour, press and
release button #3 to increase the hour and button #2 to decrease the hour. To set
the AM/ PM icon, continue changing the hour until the appropriate icon is
displayed.
Note: The remote will exit clock adjust if there is no activity for 20 seconds.

Battery Replacement

When the Battery Icon on the remote transmitter indicates that the
battery is low the battery should be changed promptly. Replace with a
quality 1.5volt "AAA" battery.
Lift
Slide
Note- Avoid reinstalling the battery in the wrong direction
Negative
Positive
OWNER'S GUIDE
Slide
Page 9
1 2 3
4