Setting The Time - Ultra Start 1271M Owner's Manual

OWNER'S GUIDE
LCD DISPLAY

Setting The Time

Press and hold the
minute portion of the clock begins to flash.
To change from minutes to hours, press and release the
To increase the minutes or hours, press and release the
To decrease the minutes or hours, press and release the
Press and release the
is no activity for 20 seconds.
NOTE: To set the AM/ PM icon, continue changing the hour until the
appropriate icon is displayed.
To Enter User Program Mode
1. Press and hold the
flash, the system is now in User Program Mode.
2. Press and release the
Selected feature icon will begin to flash.
3a. Press the
3b. Press the
4. Press the
*If the remote is not used for 20 seconds the system will exit Program
Mode.
3265/4265 series
and buttons until the remote transmitter chimes and the
button to exit or the remote transmitter will exit if there
button for three seconds. The
button to scroll the list of programmable icons.
button to turn the feature icon OFF.
button to turn the feature icon ON.
button to exit program mode and save settings.
PAGE 16
button.
button.
button.
icon will begin to