Advertisement
Table of Contents
Fix the Impact Panel to the roof of the cage approximately 1ft from the back,
8
using the Ties provided. The panel can then be left to hang free or attached
to the side netting.
Anchor the cage using the provided U-pegs and ensure the frame is upright
9
and level.
Tools Required:
STEP LADDERS
Always inspect cage and net for defects before use and repair damaged parts.
i
Do not use cage with faulty parts.
Never climb on the net or cage frame. The cage must never be used without the net fitted.
Please adhere to safety instructions at all times.
www.networldsports.co.uk // +44 (0) 1691 683 807 // cs@networldsports.co.uk
www.networldsports.com // 1-866-861-9095 // cs@networldsports.com
ALLEN KEY
@NetWorldSports
1 0 f t x 1 0 f t x 1 0 f t F R E E S T A N D I N G C A G E
128 3 WAY
PARTS
STEEL BARS
90° CORNER
x6
QTY
x11
125 2 WAY
10ftx10ftx10ft
10ftx10ft
90° ELBOW
IMPACT PANEL
GOLF NET
x2
x1
x1
TWINE &
CABLE TIES
x1 PCK
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Net World Sports FORB GOLF
Summary of Contents for Net World Sports FORB GOLF
- Page 1 Fix the Impact Panel to the roof of the cage approximately 1ft from the back, using the Ties provided. The panel can then be left to hang free or attached to the side netting. 1 0 f t x 1 0 f t x 1 0 f t F R E E S T A N D I N G C A G E Anchor the cage using the provided U-pegs and ensure the frame is upright and level.
- Page 2 Assemble the top of the frame by attaching 4 x 128 3-Way 90° Corners to the Lay out all the Steel Bars and connectors checking that they match the parts list. Upright Bars and 4 x Steel Bars to the 128 3-Way 90° Corners. Note: a step ladder is required for this step.
Need help?
Do you have a question about the FORB GOLF and is the answer not in the manual?
Questions and answers