Page 3
Assemble the cross sections of the cage. Starting at the front end, Join cross sections Parts required; 6x LZ-01, 3xLZ-02, 1xMZ-01, 6x HL- together as in diagram Fig.1. This step will 01, 3x T-3L, 3x T-3R, 2x T-2, 6x T-3Z, 6x T-4 . require step ladders.
Page 4
Secure net to cage using twine and ties. Attach wheel to wheel bracket using M8x20 bolts M8 Before use ensure all bolts are tight. washers and lock nuts. Ensure Brace bar is in place before moving cage Once the wheels are attached, Starting at the front end fit the wheel plate to cage.