Advertisement
6
OPTIONAL: Tighten the pre-installed locking screw on the base of the
Power Pack using the included screwdriver.
Note: You will need to loosen the locking screw to remove the Power Pack in the future.
Attention: This camera includes an Auto Mechanical IR Cut Filter. When the camera changes between Day/Night viewing modes, an audible clicking noise may be heard from the camera. This clicking is normal,
and indicates that the camera filter is working.
7
Twist the adjustment ring near the camera base counterclockwise to loosen
and reposition the camera. Hold the camera in the desired angle and tighten
the adjustment ring completely to secure the camera in place.
10
Hide quick links:
Advertisement
