Follow the instructions below to secure the cameras. It is recommended that you refer to the "Installation Tips" section to help you select good mounting locations.
To install your cameras:
1
Set the mounting bracket in the desired mounting position. Mark holes through
the mounting bracket (shown as orange X's on the below).
2
Drill holes where marked for the mounting screws using the included drill bit.
Note:
To make camera installation easier, you can adhere included bracket location stickers to the place you
would like to install your cameras.
3
Secure the bracket to the mounting surface with the included mounting
screws (×4). Make sure all screws are fastened tightly.
Note:
Insert the included drywall anchors if you are mounting the camera onto drywall.
•
The hole at the top of the mounting bracket will be used in step