Huawei OptiX PTN Series Quick Installation Manual page 42

Engineering Labels
1 Affixing Labels
NOTE
Affix a label to a cable/fiber 2 cm away from its connectors.
a Affixing a Label to a Power Cable
Cable
Attach the identification plate on top of the
cable when the cable is routed horizontally.
b Affixing a Label to a Signal Cable
Fiber
Fold to the right
Label
NOTE
If a cable is routed vertically, the label must face to the right. If
a cable is routed horizontally, the label must face downwards.
Identification plate
To:
B03 — -48V2
Cable
Fiber
Fold upwards
39
Attach the identification plate
on the right side of the cable
when the cable is routed
vertically.
Identification plate
Fiber
To:
A03 - 33 - 33 - 33 -33