Disposal And Recycling Instructions - Leroy-Somer Nidec R180 Installation And Maintenance Manual

Electric Power Generation

Disposal and recycling instructions

We are committed
environmental impact of our activity. We
continuously monitor
processes, material sourcing and products
design to improve recyclability and minimise
our environmental footprint.
These instructions are for information
purposes only. It is the user's responsibility
to comply with local legislation regarding
product disposal and recycling.
Waste & hazardous materials
The following components and materials
require special treatment and must be
separated from the alternator before the
recycling process:
- electronic materials found in the terminal
box, including the automatic voltage
regulator (198), current transformers (176),
interference suppression module and other
semi-conductors.
- diode bridge (343) and surge suppressor
(347), found on the alternator rotor.
- major plastic components, such as the
terminal box structure on some products.
Installation and maintenance
R180
AVR
limiting the
our production
These components are usually marked with
information concerning the type of plastic.
All materials listed above need special
treatment to separate
reclaimable materials and should be
entrusted to specialist recycling companies.
5599 en - 2020.07 / f
waste from
17