Code Alarm caSEC Installation And Reference Manual page 26

Feature Bank 3 - Output Control
1 - Lock / Unlock Timing: Controls the timing of the BLUE and GREEN lock output
wires.
1 Sec. - Single 1 second lock pulse, single 1 second unlock pulse.
3.5 Sec. - Single 3.5 second lock pulse, single 3.5 second unlock pulse.
1 Sec. Lock, 2x Unlock - Single 1 second lock pulse, double 1 second unlock
pulse.
30 Sec. Lock, 2x Unlock - Single 30 second lock pulse, double 1 second
unlock pulse.
2x Lock, 1 Sec. Unlock - Double 1 second lock pulse, single 1 second unlock
pulse.
0.5 Sec. Pulse - Single 0.5 second lock pulse, single 0.5 second unlock pulse.
2 - Factory Disarm 2, Lt Green/Black Output: Controls the timing of the Lt Green/
Black Factory Disarm wire.
Factory Disarm - Single 1 second pulse with unlock and remote start
activation.
2nd Unlock - Same output timing as unlock with 2nd press of unlock only.
Factory Disarm 2x 500mS - Double 500mS second pulse with unlock and
remote start activation.
Factory Disarm 350mS - Single 350mS second pulse with unlock and remote
start activation.
Factory Disarm 500mS - Single 500mS second pulse with unlock and remote
start activation.
Factory Disarm w/ Unlock Timing - Uses the timing option set for Unlock in
Bank 3, Feature 1.
3 - Ignition Locks: Control of door locks when the ignition is cycled ON or OFF.
OFF - Door locks not activated by ignition.
Lock / Unlock - Doors lock when ignition is turned on and unlock when
ignition is turned off.
Lock Only - Doors lock when ignition is turned on.
Unlock Only - Doors unlock when ignition is turned off.
26 caSEC revB