(5-5) Osd Display; (5-6) System Provider Mode; (6) Power Management; (7) Dtv Programme Update - LG LU34 Z Series Installation Manual

(5-5) OSD Display

Decide to display OSD or not by setting OSD Display as On (Display) or Off (Do not
Display).
• When OSD Display is set to Off (Do not Display), all OSD is not displayed except some
exception.
• Although select Off (Do not Display), the action that press a (SETTINGS) for 5 seconds
to enter installation menu and entering service menu are available. (In-Start, Power-
Only, Adjust, Installation Menu ...)

(5-6) System Provider Mode

System Provider Mode allows access to the menu system from the front panel or remote
control but access is controlled as follows:
• When value is On, Accessible Items on the menu system, others are not permissible.
- Input select screens
- Sleep Timer
- Alarm (Only for LU5**H series)
- Aspect Ratio
- Subtitles
- Lock System, Set Password
- My Media / Network Menu
- Support Menu(* LU30* C series use 'About This TV')
• Q.menu, which is related to Setup Menu or Programmes Menu, is not accessible.
• If the Programme map is empty, Auto-tuning guide dialog should be blocked by
pressing List, Fav, CH+ (Page up), CH- (Page down) keys.

(6) Power Management

The Power Management feature will turn off the television receiver if no input control command is
received from either the Local or IR Key within a selected hours.
• Activity on either of these inputs shall restart the Power Management timer and prevent
interruption of TV viewing.
• This entry can be set to a value which is corresponding to the desired hours (1 to 7).
• Default value is Off (disabled).
• TV should off and on after apply this setting.

(7) DTV Programme Update

It is a mode to set whether to update DTV Programme information automatically or not.
• When DTV Programme Update is set to Auto, the function to update TV's Programme map
according to DTV Programme's stream information
• DTV Programme Update is set to Manual, the function to keep TV's Programme map even
though DTV Programme's information is changed.
• For LU5**H series, this function is available in CONFIGURATION SETUP
8