(3) Volume (0 ≤ Min ≤ Start ≤ Max ≤ 100); (3-1) Start Volume; (3-2) Maximum Volume; (3-3) Minimum Volume - LG LU34 Z Series Installation Manual

(3) Volume (0 ≤ Min ≤ Start ≤ Max ≤ 100)
• Decide to apply volume policy of Start Volume, Maximum Volume and Minimum Volume
as On (Work) or Off (Do Not Work).

(3-1) Start Volume

This entry sets the start volume level when is power on.
• The level is specified as a number between minimum volume to maximum value.
(Min ≤ Start ≤ Max)
• The default setting is Off (disabled).
• When enabled, if the value is lower then the minimum specified in the minimum
volume entry, the minimum volume entry must be used.
• When enabled, if the value is larger then the maximum specified in the maximum
volume entry, the maximum volume value must be used.
• Access to a volume in Timer Power On must be fixed to start volume when LG Hotel
Mode Setup (On) and Start Volume (Off, 0 ~ 100) were set simultaneously.

(3-2) Maximum Volume

This entry sets the Maximum Volume level the set.
• The level is specified as a number between Minimum Volume to 100. (Min ≤ Max ≤ 100)
• If the command volume up to higher than maximum volume is received, that should be
ignored.
• The default value is 100.

(3-3) Minimum Volume

This entry sets the Minimum Volume level the set will produce.
• The level is specified as a number between 0 to Maximum Volume. (0 ≤ Min ≤ Max)
• If the command volume down to lower than minimum volume is received, that should
be ignored.
• The default value is 0.
5