Table of Contents
Advertisement
(6) Auto Sensing
• The input is automatically switched when the input signal that you set to On is received.
• If Auto Sensing is set to Off, the input is not switched when the input signal is received.
• If SIMPLINK is set to On, HDMI is automatically set to Off and can not work.
• If the signal is removed while Auto Sensing (automatic input switch) is enabled, the input returns
to the previous setting.
• If the several inputs are connected by enabling Auto Sensing and the automatic input switch is
performed several times, the input returns to the previous setting only for the last input and does
not repeat the operation for the rest.
• For the AV input connected using the euro scart cable, Auto Sensing does not work for the TV
input because the Auto AV function is enabled.(For other inputs, Auto Sensing works normally.)
(7) Forced DVI Audio
• When Forced DVI Audio is selected, the audio signal from the HDMI port will be transmitted
through the RGB, AV, or Audio In #1 component ports.
• The video signal will be transmitted through HDMI to be displayed on the screen in standard
quality.
(8) One Channel Map
• If One Channel Map is On, the TV will operate as below.
- When the TV is auto-scanning, it searches both air and cable Programmes.
- In Programme Edit window, all Programmes are shown in a single list regardless of input source.
(DTV/RADIO/TV) (For satellite supported models, a Satellite input source is also included.)
- Select the Auto Sort button in the Programme Edit window to sort Programmes sequentially.
(9) RS232 DC Power Outlet
* Only for LU5**H series
• It is a mode to decide whether to output DC or not for power supply to IB Box in Installation
Menu.
• We offer a output terminal in one Pin of RS232C Jack for the use of communication.
• 5 V DC Power Outlet and 12 V DC Power Outlet must operate mutually exclusively. That is, only
one of the two sides must be turned on.
• You can select Off, 5 V or 12 V.
- When select 5 V the 5 V is forwarded through the port. when select 12 V the 12 V is forwarded
through the port.
(10) DTV Programme Update
* Only for LU5**H series
• It is a mode to set whether to update dtv Programme automatically or not.
• When DTV Programme Update is set to Auto, the function to update TV's programme map
according to dtv programme's stream information.
• DTV Programme Update is set to Manual, the function to keep TV's programme map even though
dtv programme's information is changed.
(11) Radio Name Display
* Only for LU5**H series
• Instead of "Audio Only", the name of a radio Programme is displayed on the screen when a radio
broadcast is playing.
• Set to On (Work) or Off (Do Not Work).
• If the setting is On, the name of a radio Programme is displayed for the radio Programme.
• If the setting is Off, the text "Audio Only" is displayed for the radio Programme.
24
Advertisement
Table of Contents
