LG LU34 Z Series Installation Manual page 21

(7) RF Freq.(kHz)
* Frequency range can vary with country
• Sets the RF frequency at which the Pro:Centric data is received.
• Frequency tolerance: start frequency~end frequency for each country
- If the RF Type is DVB-T, it can be changed in the range of 47000~890000. (End frequency may
vary by country.)
- If the RF Type is DVB-C, it can be changed in the range of 46000~890000.
(8) P:C IP Setting
* Only for LU54** series
• It can be set using the < > button or number buttons.
- (IP a): Sets the first number in the IPv4 address.
- (IP b): Sets the second number in the IPv4 address.
- (IP c): Sets the third number in the IPv4 address.
- (IP d): Sets the fourth number in the IPv4 address.
- (Port): Sets the actual port number where the Pro:Centric server is running. It can be set using
the < > or number buttons.
• The default value of IP a/b/c/d is 0 and the range is between 0 and 255. The default value of Port is
80 and the range is between 0 and 65535.
(9) Native EPG
* Only for LU541H-ZA
• Set to On or Off.
- When set to On, Native EPG feature can be used.
- When set to Off, Native EPG feature cannot be used.
- The feature is set to Off as default.
21