LG LU34 Z Series Installation Manual page 14

Table of Contents

Advertisement

USB Cloning
An Installer can quickly set up and clone multiple TV sets at a property. These cloned TVs will
all have the same Master TV Setup: Public Display Settings, Installation menu settings, User A/V
settings and the Programme Map. This newer procedure significantly decreases the installation time
that would be necessary if the standard RS-232C method were used instead.
Introduction
(1) Overview USB Cloning Procedure
• Commercial TVs have the capability to support cloning internal TV data and Programme
information with an external clone device called USB Cloning, in order to copy TV data accurately
and quickly. The clone internal functions use slightly different internal processes for the two
types of commercial TVs. However, the UI of cloning feature remains the same in both. Regarding
the demands over the current cloning feature for quicker cloning, better portability and etc, we
would like to announce the cloning process via USB port, named as USB Cloning. USB cloning
process is divided into 2 main processes. One is writing the previously saved TV data into the TV,
and one another is reading of current TV data into USB memory card. To avoid any confusion due
to the words, it is clearly specified as Receive from USB and Send to USB in the whole process.
(2) Data To Be Cloned
• The data cloned are the same data cloned by previous USB Cloning. Details are explained in the
following:
- 1. TV data includes:
A. Installer Menu settings
B. Main menu settings (Audio, Picture etc)
- 2. Analog / Digital Programme information includes:
A. Programme numbers
B. Programme label
C. Programme attributes including Programme type, skipping status and etc.
(3) Input Source
The user needs a USB memory card with FAT formatted to make successive cloning via USB port. A
USB memory card size more than 128 MB and less than 4 GB is recommended.
NOTE
• Currently, support the preceding USB file system for FAT file format only. Other file formats
including NTFS is not currently supported. Microsoft Windows officially supports FAT for the USB
memory card.
14

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lu34 t seriesLu54 t series

Table of Contents