Fuel System; Air Filter; Filter Housing - Stihl FS 240 Service Manual

11.

Fuel system

11.1

Air filter

– Refer also to troubleshooting,
b 3.6, b 3.7
2
1
: Remove screws (1)
: Remove the filter cover (2)
: Remove the air filter (1)
– Examine air filter, clean or
replace if necessary
– see Instruction Manual
– Reassemble parts in reverse
order
FS 240 C, FS 260 C, FS 360 C, FS 410 C, FS 460 C-M
11.2

Filter housing

– Remove the air filter, b 11.1
Versions with M-Tronic
1
1
: Remove plug (1) on diagnostic
connector (arrow)
All versions
1
2
: Remove screws (1)
In versions with M-Tronic, the
grommet (2) is not removed
because it is connected to the
switchgear.
: Remove grommet (2)
All versions
: Remove tank vent hose (1) at the
connector (arrow) – always use a
new tank vent hose
1
: Unscrew nuts (1) and pull off filter
housing (2)
1
: Press out grommet (1) in the
direction of the carburetor
– For versions with M-Tronic:
check the plug of the diagnostic
connector, replace if necessary
1
1 1
2
1
91