Removal And Installation - Stihl FS 240 Service Manual

7.4

Removal and installation

– Remove shroud, b 5.4
– Remove the air filter cover,
b 11.1
– Check M-Tronic, b 7.3
– Detach M-Tronic leads from
cable holder and remove wiring
harness with throttle cable on
engine, b 6.6.3
1
: Remove the plug (1)
: Remove screws (2)
2
: Remove the plug (1)
: Pull leads out of the
guides (arrows)
: Remove bushing (2) with M-
Tronic
62
1
: Unscrew screw (1) and remove
switchgear
2
2
: Pull leads out of the
guides (arrows)
1
2 3
: Unscrew screw (1) and remove
diagnostic connector (2) from the
mount of the bushing (3)
Installation
With a new switchgear, first the thin
leads must be inserted in the guides
of the switchgear.
Leads and plug connections must
not be damaged.
3
Leads with plug (1) to solenoid
valve of the carburetor.
: Press red lead (2) and black
lead (3) into the guides (arrows)
of the switchgear (4) so that they
form a loop
– see illustration
2
1
Leads with diagnostic plug (1).
: Press red lead (2) and black
lead (3) completely into the
guides (arrows) of the
switchgear (4)
– see illustration
FS 240 C, FS 260 C, FS 360 C, FS 410 C, FS 460 C-M
2 1
4
1 4
3