PRESONUS ioStation 24c Owner's Manual page 24

6 Logic (MCU)
6.1 Getting Started
4. In the pop-up menu, go to New | Install...
5. From the list of devices, select Mackie Control.
6. Click Add.
7. Right-click on the Mackie Control in the Control Surface
Setup and select Show/Hide Inspector.
8. In the Inspector, set the Input and Output ports to "ioStation 24c. "
Your ioStation 24c is now ready to use. Enjoy!
ioStation 24c Audio Interface and Production Controllers
Owner's Manual
22