Installation For Macos; Using The Iostation 24C With Popular Audio Applications - PRESONUS ioStation 24c Owner's Manual

3 Connecting to a Computer
3.2

Installation for macOS

Installation for macOS
3.2

Using the ioStation 24c with Popular Audio Applications

3.3
Steinberg Cubase 4+
Ableton Live 5+
Apple Logic Pro/Express 7+:
Your ioStation 24c is a class-compliant Core Audio device
in macOS. No driver installation is necessary.
Complete setup instructions for Studio One Artist and a brief tutorial on
its features can be found in Section 9 of this manual. However, you can
use your ioStation 24c with any audio-recording application that supports
Core Audio or ASIO. Please consult the documentation that came with
your audio application for specific instructions on how to select the
ioStation 24c driver as the audio-device driver for your software.
Below are basic driver-setup instructions for a few popular audio applications.
1. Launch Cubase.
2. Go to Devices | Device Setup.
3. Select "VST Audio System" from the Devices column in the Device Setup.
4. Select your ioStation 24c from the ASIO Driver dropdown list.
5. Click "Switch" to begin using the Studio-series Driver.
6. Once you have successfully changed the driver, go to Devices |
VST Connections to enable your input and output buses.
1. Launch Ableton Live.
2. Go to Options | Preferences | Audio.
3. Choose Driver Type: ASIO | Audio Device: ASIO ioStation 24c
4. Go to Input Config: Enable and select the desired Input channels.
5. Go to Output Config: Enable and select the desired Output channels.
6. You may now select your ioStation 24c inputs and
outputs for each track created in Live.
1. Launch Logic Pro/Express.
2. Go to Logic | Preferences | Audio.
3. Click on the Devices Tab.
4. On the Core Audio tab, check Enabled.
5. Select your ioStation 24c from the device menu.
6. You will be asked if you'd like to relaunch Logic. Click "try (re)launch. "
7. Your ioStation 24c features custom I/O labels for faster work flow. To
enable these labels for use in Logic, go to Options | Audio | I/O Labels.
8. The second column in the pop-up window will be named
"Provided by Driver. " Activate each of these labels for your
ioStation 24c. When you are done, close this window.
9. You are now ready to use your ioStation 24c.
ioStation 24c Audio Interface and Production Controllers
Owner's Manual
11