PRESONUS ioStation 24c Owner's Manual page 6

1 Overview
1.4 Firmware Updates
Once installed, connect your ioStation 24c to your computer.
Universal Control will alert you if there is new firmware available for your
ioStation 24c. Clicking on the Update Firmware button will begin the
update process. This process can take up to five minutes. At the end of the
firmware update, you will be prompted to reboot your ioStation 24c.
Once rebooted, your ioStation 24c fader may require recalibration. This is an
automated process. Do not interfere with or interrupt the fader calibration process.
Note: One of the Operating Modes must be selected to perform a firmware update.
ioStation 24c Audio Interface and Production Controllers
Owner's Manual
4