Juniper EX4600 Quick Start Manual page 8

6. (Optional) Configure the name of the switch. If the name includes spaces, enclose the name in quotation marks (" ").
[edit]
root@# set system host-name host-name
7. Configure the default gateway.
[edit]
root@# set routing-options static route default next-hop address
8. Configure the IP address and prefix length for the router management interface.
[edit]
root@# set interfaces em0 unit 0 family inet address address/prefix-length
NOTE: The management ports, em0 (C0) and em1 (C1), are found on the FRU side of the EX4600 switch.
9. (Optional) Configure the static routes to remote prefixes with access to the management port.
[edit]
root@# set routing-options static route remote-prefix next-hop destination-IP retain no-readvertise
10. Enable Telnet service.
[edit]
root@# set system services telnet
11. Enable SSH service.
[edit]
root@# commit
8