Operating And Safety Precautions; Introduction; Initial Inspection - Keysight Technologies 16065C Operation And Service Manual

Keysight 16065C External Bias Adapter
Operation and Service Manual

2 Operating and Safety Precautions

Introduction

This chapter explains how to install the 16065C External Bias Adapter. The
topics covered include initial inspection, ambient environmental
considerations, connecting the adapter for use, and repackaging the adapter.

Initial Inspection

The adapter has been carefully inspected electrically and mechanically before
being shipped from the factory. It should be in perfect physical condition, no
scratches, dents or the like, and it should be in perfect electrical condition.
Verify this by carefully performing an incoming inspection to check the adapter
for signs of physical damage and missing contents. If any discrepancy is found,
notify the carrier and Keysight Technologies. Your Keysight Technologies sales
office will arrange for repair and replacement without waiting for the claim to
be settled.
Step 1. Inspect the shipping container for damage, and keep the shipping materials
until the inspection is completed.
Step 2. Verify that the shipping container contains everything shown in
and listed in
Step 3. Inspect the exterior of the 16065C for any signs of damage.
Table 2-1.
Figure 2-1