Using The Controls - aventon LEVEL 2020 Owner's Manual

USING THE CONTROLS

To turn on your bike, press and hold the "M" button for 3 seconds.
To turn off, press and hold the "M" button for 3 seconds. The
display and battery have an energy-saving feature, if there is no
activity for 10 minutes, they will turn off automatically to preserve
battery life.
Tap the "U" or "D" arrows to change the level of pedal assist.
Hold "U" and "M" for 3 seconds to switch between showing real-
time speed, average speed, and max speed.
Tap "M" to toggle between the display of the Odometer, Trip
Distance, Voltage, and Elapsed Time.
Press and hold "U" for 3 seconds to enable the backlight on the
display. Press and hold "U" again for 4 seconds to turn it off.
To enable walk mode, first come to a complete stop and stand
next to the bike. Press and hold "D" for 3 seconds. The bike will
slowly move forward at 3.5 MPH / 6 KPH as long as you hold the
"D" button. This feature is useful for pushing the bike up a hill or
walking through a crowd, where you cannot safely ride.
To use the walk mode, set the pedal assist to level 1 - 5. Walk
Mode will not engage at pedal assist level 0.
LEVEL OWNER'S MANUAL 4