Safe Starting & Stopping - aventon LEVEL 2020 Owner's Manual

SAFE STARTING & STOPPING
Remember that if pedal assist is turned on, the motor will turn on
and begin to push you forward anytime the pedals rotate (even if
you rotate the pedals unintentionally.) That could be unsafe if you
weren't expecting the motor to turn on.
You should turn off pedal assist (by setting the display to level
zero) when you are not using it to prevent accidentally engaging
the motor on your ebike.
The motor interrupt brake levers on Aventon ebikes stop
the motor from running when they are squeezed. This adds
an additional measure of safety - when you are sitting on, or
straddling the bike, but not moving, (for example, when stopped
at a stoplight) get into the habit of squeezing the brake levers.
This habit stops you from accidentally engaging the motor.
Release the brake levers when you begin riding and intend to use
pedal assist again.
The motor interrupt brake levers can also be used to control your
speed in areas where pedal assist is not desired. For example,
if you are riding at slow speed through a farmer's market or
downtown pedestrian mall, you can pedal to propel the bike
forward, while simultaneously lightly dragging the brakes. This
allows you to ride without the motor turning on at all.
When you're completely done riding your bike, power off both
the display and battery (if your model is equipped with a separate
power switch on the battery) to prevent accidentally engaging the
LEVEL OWNER'S MANUAL 12