Error Codes And Troubleshooting - aventon LEVEL 2020 Owner's Manual

ERROR CODES AND TROUBLESHOOTING

In the event of a problem with the electrical components of your
bike, the display will show an error code. Compare the code with
this list below and HOW TO RESOLVE:
CODE ERROR
Current
21
Current Limit
Throttle
22
Throttle Cable
Throttle Hall
LEVEL OWNER'S MANUAL
1. Stop riding and let the bike cool
Error
2. If a second Aventon compatible ebike
Exceeded
or
Damaged
Cable
Error
Damaged
or
Sensor
HOW TO RESOLVE
down for 2 minutes to see if the
error code disappears. If the error
code persists, check to confirm that
the motor and controller cables are
properly connected, also check cables
for damage or wear and tear on the
connectors.
is present, connect the motor to a
known-good working controller see if
motor works correctly. If the motor runs
normally on a different controller, then
replace the controller on the affected
bike. If the motor doesn't work with the
known-good working controller, then
replace the motor.
When you press and release the
throttle, it should return to the original
position. Remove any obstructions.
Check the throttle and throttle cable for
damage, such as a cut or frayed cable.
Disconnect and re-connect the throttle
cable, if this fails to resolve the error
code, replace the throttle assembly.
14