TurboChef HHB-8114 Owner's Manual page 12

4 THEORY OF OPERATION, SPECIFICATIONS, AND INSTALLATION
2: Stacked HHB Ovens Secured to Cart
F I G U R E
bolted to the cart and wheels are locked (see
previous section).
4. Attach the Stacking Bracket (P/N HHB-8159)
to the back of the bottom oven:
a. Remove the screws marked with gray arrows
in Figure 2.
b. Align the holes on the Stacking Bracket with
the holes on the oven and reinstall the screws.
Be sure to orient the bracket as shown in Figure
2, above.
6. Remove the screws from the oven that will be
placed on top, as marked with black arrows in
Figure 2.
7. Place the oven on top of the oven that has the
Stacking Bracket attached.
WARNING: Do not attempt to lift the oven
with fewer than 2 people.
WARNING: When lifting the oven, position
at least one person on each side. Do not lift
the oven from the front and back, and do not
use the handle to lift the oven.
8. Align the holes on the Stacking Bracket with the
holes on the top oven and reinstall the screws.
WARNING: Do not stack ovens over two-
high.
Bolt
Flat Washer
Bracket
Flat Washer
Split-Lock Washer
Nut