Huawei SmartACBox Quick Manual page 13

4. Connect the single-phase power cable
to the JX02 terminal block.
Use a torque screwdriver with an M3
flat-head to secure the JX02 terminal
block cable and use a torque
screwdriver with an M4 Phillips head to
secure the protective earthing cable.
Installing the AC Input Power Cable
6.6
NOTE
Connect the AC input power cable from the SmartACBox to input circuit breakers QF01 to QF12.
Recommended: Route the AC input power cables to input circuit breakers QF01 to QF06 through
cable hole 1; route the AC input power cables to input circuit breakers QF07 to QF12 through
cable hole 2.
1. Remove an appropriate length of the jacket and insulation layer from the AC input power cable
using a wire stripper.
•
The lengths of the jackets and insulation layers
that need to be removed from the AC input
power cables to input circuit breakers QF01 to
QF06 are different. When connecting a stripped
cable, ensure that the exposed insulation layer is
all in the enclosure, and the jacket is all outside
the enclosure.
•
For the lengths of the jackets and insulation
layers that need to be removed from the AC
input power cables to input circuit breakers QF07
to QF12, refer to the AC input power cables to
input circuit breakers QF01 to QF06.
2. Crimp an OT terminal.
3. Route the cable through the cable holes 1 and 2 for the AC input power cable.
Core wire
12
Insulation
layer
Jacket