Table of Contents
Advertisement
Cable Holder Installation (Optional)
You can attach the cable holder to the bottom of the wireless device. This
helps to keep cabling neat and avoid accidents that result from untidy
cables.
STEP 1: Screw the cable holder onto the bottom
of the IE-WL-AP-BR-CL-ABG.
STEP 2: After mounting the IE-WL-AP-BR-CL-ABG and plugging in the
LAN cable, tighten the cable along the device and wall.
Communication Connections
10/100BaseT(X) Ethernet Port Connection
The 10/100BaseT(X) ports located on the IE-WL-AP-BR-CL-ABG's front
panel are used to connect to Ethernet-enabled devices.
The pinouts for both MDI (NIC-type) ports and MDI-X (HUB/Switch-type)
ports are shown below.
MDI Port Pinouts
MDI-X Port Pinouts
Pin
Signal
Pin
1
Tx+
1
2
Tx-
2
3
Rx+
3
6
Rx-
6
8-pin RJ45
Signal
Rx+
1
Rx-
Tx+
Tx-
- 9 -
8
Advertisement
Table of Contents
