Mounting Dimensions (Unit = Mm); Din-Rail Mounting - Weidmuller IE-WL-AP-BR-CL-ABG-EU Hardware Installation Manual

Mounting Dimensions (unit = mm)

105.00 [4.13"]

DIN-Rail Mounting

The aluminum DIN-Rail attachment plate should be fixed to the back
panel of the wireless device when you take it out of the box. If you need
to reattach the DIN-Rail attachment plate to the device, make sure the
stiff metal spring is situated towards the top, as shown in the figures
below.
STEP 1:
Insert the top of the DIN-Rail into the
slot just below the stiff metal spring.
To remove the IE-WL-AP-BR-CL-ABG from the DIN-Rail, simply reverse
Steps 1 and 2.
45.80 [1.80"]
52.98 [2.09"]
STEP 2:
The DIN-Rail attachment unit will
snap into place as shown below.
- 5 -