FANATEC CSL Elite F1 Set Manual page 33

When the Wheel Base Updater is
connected to the CSL Elite Wheel
Base + the buttons Load Hex File
and 'Flash Firmware' are available as
shown on the right-hand side:
Use button Load Hex File to browse
and select the wanted firmware file
(.hex). Usually the latest available
firmware found is already pre-select-
ed and this step can be skipped.
When the pre-selected firmware file
(.hex) is ok or the wanted firmware
file (.hex) is chosen press button
'Flash Firmware' to execute the firm-
ware update.
The firmware update is proceeding.
You can see the progress bar becom-
ing green as shown on the right-hand
side:
33