Attaching A Csl Elite Steering Wheel With Simplified Quick Release - FANATEC CSL Elite F1 Set Manual

6.6 Attaching a CSL Steering Wheel with Simplified Quick Release
Use clamp ring bolt (M6 x 18mm flat head)
and Allen key from box contents.
Align the CSL Elite Wheel Base +.
Slide the CSL Elite Steering Wheel
onto the wheel base + axle.
Turn the CSL Elite Steering Wheel top side down to see the bottom side of
the clamp ring to follow the next step below.
Push the CSL Elite Steering Wheel until the bolt hole
aligns with the hole on the CSL Elite Wheel Base +
axle.
Tighten the bolt to fix the clamp ring mechanism. Use
only the Allen key which comes with the CSL Elite
Wheel Base +.
IMPORTANT: Tighten only by using the short lever of the Allen key!
18