Tips On Lawn Care; Transporting The Appliance; Cleaning/Servicing - Wolf Garten EXPERT 105.220 H Original Operating Instructions

English
Engage the drive pedal slowly

to choose the forwards speed.
The appliance starts moving.
General information
When adjusting the cutting height
and driving speed, ensure that
the machine is not overloaded.
Depending on the length, type,
and dampness of the grass it may
become necessary to adjust the
cutting height and appliance speed
for the optimum grass catcher
performance. If blockages occur,
reduce the driving speed and
increase the cutting height.
Switching off the machine
Stopping the appliance.

Switch off the cutter deck.

Move the throttle to the middle

position.
Raise the cutters to the top.

Set the ignition key to

twenty seconds.
Remove the ignition key.

Engage the locking brake before

leaving the appliance.
Pushing units with
hydrostatic drive
Fig. 16
Push the appliance only when the
engine is switched OFF.
Release the parking brake.

Releasing the gears (depending

on model):
– Pull out lever and press down
(Fig. 16a).
or
– Pull out lever and press up
(Fig. 16b).
Return the gear lock lever before
restarting the engine.
Mulching
Various appliances can also mulch
when fitted with the corresponding
accessories. Ask your specialised
dealer for details.
Emptying the grass catcher
(depending on model)
See the separate operating
instructions for the grass catcher.

Tips on lawn care

Mowing
Lawns consist of various grass
types. Frequent mowing promotes
the growth of grass, resulting in
strong roots and a firm sward.
If you seldom cut the grass, you will
enhance the development of high-
growing types of grass and other
weeds, such as clover, daisies ...).
The normal height of a lawn is
approx. 4–5 cm. Only
overall height of the grass should
be mown; i.e. at 7–8 cm, cut at
normal height. Try not to cut the
grass shorter than 4 cm, otherwise
the lawn will suffer during dry
periods. If the grass has grown
particularly high (for example,
during a holiday period), cut it back
to its normal height in several
after
stages.
Mulching (using the
accessories)
The grass is cut into small pieces
(approx. 1 cm) and left to lie on the
lawn. The lawn therefore retains
a lot of nutrients.
For the best possible result the
grass must always be kept short,
see also section "Mowing".
Observe the following when
mulching:
– Do not mow wet grass.
– Never mow more than max. 2 cm
of the total grass length.
– Drive slowly.
– Use the max engine speed.
– Clean the cutters regularly.
Transporting the
appliance
If changing location, drive the lawn
tractor short distances only.
otherwise transport it by vehicle.
Note: The mower is not approved
for public thoroughfares in
accordance with StVO.
Operating instructions for lawn tractors
Short distances
Danger
!
Solid objects may be hit/propelled
by the rotating cutting mechanism
causing damage.
Always switch off the cutting

mechanism before moving the
mower.
Long distances
Warning
Transport damages
1
/ of the
3
The mode of transport used (e.g.
transport vehicle, loading ramp)
must be used in accordance with
guidelines (refer to the respective
operating instructions). When
transporting, secure the mower
against slipping.
Environmental hazard from leaking
fuel
The appliance must not be tilted
when it is transported.
Have the transporting vehicle

ready.
Lay the loading ramp to the

transporting vehicle.
Set the appliance to idle, release

the gear lock (for appliances with
hydrostatic drive only), and push
it by hand on the loading
platform.
Lock the parking brake.

Secure the machine to prevent

it from moving.

Cleaning/Servicing

Danger
!
Risk of injury through the engine
being unintentionally started.
Protect yourself from injury. Before
doing any work to this appliance:
– turn the engine off,
– remove the ignition key,
– lock the parking brake.
– wait until all moving parts have
come to rest and the engine has
fully cooled,
– remove the spark plug connector
on the engine in order to prevent
the engine from accidentally
being started.
11