Russell Hobbs RHPAC3001 Manual page 13

USING YOUR AIR CONDITIONER
Switching the unit of temperature
Hold both the INCREASE and DECREASE buttons at the same time until the
appliance beeps (approx. 5 seconds). Once the appliance has beeped you
will be able to change the unit of temperature.
For example:
Before change and when in cool mode the screen
will display like this.
After the change the screen will then display like
this.
Setting the timer
The timer can be used to schedule the start up or shutting down of the
appliance.
Programming start up:
‐ Turn on the appliance and select the mode, temperature and fan
speed you desire, then turn off the appliance.
‐ Press the TIMER button and the screen will display 1-24 hours.
Page 13