Safety Information; Operating Environment; Safety-Conscious Working; Qualification Of The Operating Personnel - Key Diagnostics DOSIPUMP DP 1000 Series User Manual

2 Safety information

2.1 Operating environment

Several factors must be noted when selecting the right operating environment for the unit. The room se-
lected may not pose an aggressive environment either for the unit itself or for its intended application.
The D P 1000 should be operated only under ambient conditions corresponding to a normal envi-
OSI UMP
ronment (5°C with maximum 80 % relative humidity).
NOTE
The D P 1000 should be installed on a clean, dry, smooth, horizontal surface. The front panel of
OSI UMP
the unit should be near to the front edge of the workbench in order to ensure convenient operation and
easy access to the touch screen. The unit should be installed in the direct vicinity of electrical socket
outlets.
Summary of the D
OSI
Temperature range:
Relative humidity:
Mains power supply:
Pollution severity:
Location:
Environment:
WARNING

2.2 Safety-conscious working

The D P 1000 complies with the state of the art and is safe to operate. The D
OSI UMP
pose residual risks and dangers if it is used and operated incorrectly by untrained personnel. All persons
entrusted with the task of operating the D
al and, in particular, the safety information or must have been instructed by superiors in such a manner
that they are able to safely operate the D
Besides the safety information listed above, other applicable provisions and regulations such as GLP,
GMP, FDA, the regulations of the German Liability Insurance Associations, those of the Heath Authority
and those of the Factory Inspectorate must also be followed.

2.3 Qualification of the operating personnel

Specialist technical training is generally required. Special knowledge is required when operating the
D P 1000 to prevent potentially dangerous situations with the unit. Non skilled staff without the
OSI UMP
corresponding specialist technical training generally do not have such qualifications and are able to per-
form these tasks only after instruction and under the supervision of specialist personnel.
Page 6 / 24
These conditions also apply to transport.
P 1000 operating environment
UMP
+5°C to +45°C
Max. 80 % up to 31°C; decreasing in linear fashion down to 50 % at 40°C
Voltage fluctuations +/- 10 % of rated value
2 in accordance with IEC 664
Complying with enclosure IP 21
Sturdy support surface
Avoid splash water and contact with chemicals.
DosiPump is not an EX Approved
We are unable to guarantee operability and functional safety of the unit if
the ambient conditions applicable to the location are not complied with.
OSI
OSI
P 1000 must have read and understood the User Manu-
UMP
P 1000.
UMP
DosiPump 1000 User Manual
P 1000 may
OSI UMP
Version 1.01E