Solid-State Drive Specifications (Sata-3) - HP 14 Maintenance And Service Manual

Table 9-3 Solid-state drive specifications (continued)
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less.
Actual drive specifications may differ slightly.
NOTE: Certain restrictions and exclusions apply. Contact support for details.

Solid-state drive specifications (SATA-3)

This section provides specifications for your solid-state drive.
Table 9-4 Solid-state drive specifications
Dimensions
Height
Weight
Interface type
Ready time, maximum (to not busy)
Access times, logical
Transfer rate
Total logical sectors
Operating temperature
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive specifications may
differ slightly.
NOTE: Certain restrictions and exclusions apply. Contact support for details.
256 GB* 512 GB*
Solid-state drive specifications (SATA-3)
1 TB*
128 GB*
1.35 mm
< 10 g
SATA-3
1.0 ms
0.1 ms
up to 540 MB/s
234,441,648
0°C to 70°C (32°F to 158°F)
75