Memory Modules - HP 14 Maintenance And Service Manual

Memory modules

To remove the memory modules, use this procedure and illustration.
Table 5-3 Memory module descriptions and part numbers
Description
8 GB, DDR4-3200
4 GB, DDR4-3200
Before removing the memory, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Remove the battery (see
If you are replacing a memory module, remove the existing memory module:
Spread the two retention clips outward (1) until the memory module tilts up at a 45° angle, and then
▲
remove the module (2). Use the same procedure to remove all memory modules.
IMPORTANT:
Do not touch the components on the memory module.
To protect a memory module after removal, place it in an electrostatic-safe container.
To install a memory module:
1. Align the notched edge of the module with the tab in the slot (1), and then press the module into the slot
at an angle until it is seated (2).
(Preparation for disassembly on page
(Bottom cover on page
Battery on page
To prevent damage to the memory module, hold the memory module by the edges only.
29).
31).
Component replacement procedures
Spare part number
937236-855
L10598-855
29).
33