FANATEC CSL Elite Wheel Base + Manual page 18

5.9.1 USB
The USB port is used to connect the CSL Elite Wheel Base+ to PlayStation 4
®
or other platforms*.
IMPORTANT: Use only the USB cable with the straight plug which is
packaged with your CSL Elite Wheel Base+ to avoid damage to the CSL
Elite Wheel Base+ or PlayStation 4 electronics!
®
5.9.2 SHIFTER1
The SHIFTER1 port is used to connect H-pattern shifters to the CSL Elite Wheel
Base+ (e.g. the ClubSport Shifter or the ClubSport Shifter SQ in H-pattern
mode.) Sequential shifters can also be connected to this port. Note: Sequential
shifters connected to this port can be mapped identically to the shifter paddles
at the CSL Elite Steering Wheel (PS4 version) or any other Fanatec steering
TM ®
wheels by PC* driver settings (see chapter 'PC* driver' of this user manual).
5.9.3 SHIFTER2
The SHIFTER2 port is used to connect sequential shifters to the CSL Elite
Wheel Base+ (e.g. the ClubSport Shifter SQ in SQ mode or the ClubSport
Static Shifter Paddles.) Note: Sequential shifters connected to this port can
be mapped identically to the shifter paddles at the CSL Elite Steering Wheel
(PS4 version) or any other Fanatec steering wheels by PC* driver settings
TM ®
(see chapter 'PC* driver' of this user manual).
Attention: H-pattern shifters will not work on SHIFTER2 port!
5.9.4 PEDAL
The PEDAL port is used to connect pedals to the CSL Elite Wheel Base+ (e.g.
the CSL Elite Pedals and CSL Elite Pedals LC.)
5.9.5 HANDBRAKE
The HANDBRAKE port is used to connect an analogue handbrake device to
the CSL Elite Wheel Base+.
*Compatibility with other platforms not tested nor endorsed by Sony Interactive Entertainment Europe.
18