Table of Contents
Advertisement
The CSL Elite Wheel Base+ has specific firmware handling the device
communication to PlayStation
hardware peripheral devices like shifters and pedals. This firmware provides
different functions for the user.
6.1 Firmware and driver update
The firmware and the PC* driver can be updated to newer versions from
Fanatec
. These updates may include bug fixes or introduction of new features
®
and compatibilities.
Before first use the CSL Elite Wheel Base+ has to be updated to the latest
firmware version which is available in the Downloads section of our website
www.fanatec.com.
You also have to use the latest PC* driver version in order to use the CSL Elite
Wheel Base+ on a PC*.
Run the downloaded file(s) and follow the instructions shown on the screen.
See more detailed description later in this user manual chapter.
IMPORTANT:
by driver so that usually it is not possible to install wrong firmwares on
the CSL Elite Wheel Base+! Do not try to force installation of any wrong
firmware to the CSL Elite Wheel Base+ to avoid damages.
IMPORTANT:
Elite Wheel Base+ has to be manually calibrated again. This is also
indicated by the display of the attached steering wheel showing 'CAL'.
This appearance will be gone after manual calibration of the wheel centre.
See chapter 'Hotkeys'
IMPORTANT:
to the CSL Elite Wheel Base+ has to be manually calibrated again. See
chapter 'Hotkeys'
20
FUNCTIONS & FEATURES
6
The CSL Elite Wheel Base+ is secured by firmware and
After firmware update the centre position of the CSL
'Wheel centre calibration' for more details.
After firmware update the H-pattern shifters connected
'Shifter calibration mode' for more details.
4 and other platforms* as well as to other
®
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CSL Elite Wheel Base + and is the answer not in the manual?
Questions and answers